Creating an Embossed Letter in StitchArtist

I normally like to create and post “polished” videos – but then there are times like this where I want to show you something that is so super quick I just can’t wait.

Do you like Embossed letter embroidery?  In StitchArtist, all you need to create an embossed letter is the object that is the shape of the frame and the letter that you want to be the hole in the embossing.  As you can see below, I created the letter “E” from a True Type Font and sized it to be the size I wanted.  This shape is from the library of built in shapes but you can create your own as ornate or simple that you want.

Shapes

So the two objects are inside each other – they kind of look like what I want my embossed letter to look like so all I need to do is add the hole in the shape of the E to the polygon shape.  This is so easy to do in StitchArtist that I created a 60 second video showing you how to do this, apply a motif fill AND add a satin border around both the outer and inner edges.

Seriously – done in 60 seconds.  Here’s how:

Now if you are not familiar with StitchArtist, here is the link to the information page.  Although I am in Level 2 in the video – this can be done in Level 1 for those that are just getting into digitizing.

Click Here for the StitchArtist Information page – click on StitchArtist in the left column to read all about this value priced SUPER DUPER EASY software!

Enjoy!


And the voting continues – thanks for your support!

TurtleI am so impressed with all of you for voting for my blog and boosting us to 300 votes!  You really made my day.  I wonder if we can get to 400 votes?  Is that too much to ask?  We have until Wednesday Jan 28th at 11:59PM MST so we shall see what happens in the next two days!

So todays free design is another that I have digitized in Embrilliance StitchArtist and it is an applique design.  There are a couple of different things about this design – the finishing stitches are not the traditional machine embroidery satin stitch.  You will also note when you watch the design stitch out that there are no jumps between the purple legs.  I really don’t like to trim jumps and the machines just stitch faster when they travel vs having to slow down, lock, trim, relocate, lock, and ramp back up to speed.  When you have run stitches that travel instead jumps that trim, the machine will just keep on the speed its going.  So when ever possible I like to incorporating travel stitches into the designs I create – hiding them under stitches that will stitch/cover later.

Both Step1of these items are very easy to accomplish in StitchArtist.  First let’s talk about how to get the pretty motif stitch around the applique pieces.  After creating the shape and choosing applique, I set the finishing stitch to None.  If I am using a fabric cutter, I only select the Position stitch.

Yes, I could simply set this stitch type to a single run since I was planning to not have a material position stitch.  However, I know me – I like to change my mind and setting it to be an applique stitch type gives me to flexibility to quickly add the material option in the future by checking the box.  If I set it to a run and later decided I wanted the second run, I would have to copy and paste and make sure it was in the right order or change it from a run to an applique, set it to none and check both boxes.  So I saved myself some extra work today by setting the shapes to applique none in the beginning.

Step2OK, so I have no finishing stitch – how do I get that?  I drew a line around the top part of the shape only along the outer edges and set it to a motif run.  Because it was an open path, The decorative stitch of the turtle shell was going to cover the spots where the head and legs connected anyway!

Step3And since the decorative stitching of the shell was going to cover the sections in between, I simply created short little single runs to travel from one leg to the next.  Since these runs are connecting to the stitches before and after, you will want to turn off the ties if you have them set on your running stitch.  There is no reason to lock these little runs as we want them to be  a planned part of the design.

So here is the link to the Turtle files.

And if you have not yet voted for my blog before the cut off time, Please take a few moments to do so!  I would certainly appreciate it!  Thank you and enjoy!

Craftsy Blogger Awards - Vote for Me badge


The post that I send a link to most often…. How to line up designs for re-hooping

I will admit that my reason for today’s post is to “make things easier for me”.  Smile with me – once you get to know me, you will find I am all about EASY – easy for me and easy for you!

I belong to quite a few machine embroidery groups on Facebook and one of the questions that I see asked quite often is how to line up multiple hoop designs such as 3 letter monograms or words/names using just a single position hoop.  I did a blog post on this a few years ago, and I teach a Craftsy class on it, I have a coupon for that class, and I have a free alignment line library for Embrilliance available from another post….so you can see ALL the work I have to do to find those posts that all relate to one another!  So as I was flying back from visiting family in CT last night I thought, “hmmm Lisa, why don’t you do a blog post with all that information in it in one place so you and everyone else can have all the information in one place”.

The most popular post on this topic is on how to add alignment lines to a design.  This technique can be done with any sized hoop and I created some screen captures of the steps I would take to use this technique for a 3 letter monogram.  For the complete original post, you can find it here: Original Post

step1 step2 Step3 Step4

In the original post, there is a link for a zipped file with alignment lines.  A few months later, Embrilliance came out with the first BX file, a library of alignment lines that could be added to any Embrilliance program.

AlignmentLibrary

This made it very easy for me – and everyone else – to add center crosshairs or alignment lines to any design.  In case you missed that blog post, here is the link to the original.

I really do like to create a stitch designs that are bigger than my hoop.  And it doesn’t matter if I have a 4×4, 5×7, 6×10 or 8×12 hoop – once you learn the technique, if you are like me, you will notice that a few things will happen:

1. The hoop size becomes irrelevant – does NOT even matter one bit anymore because you have software and can line up anything.

2. Because the hoop size is irrelevant….yes your embroidery gets bigger even when you get a bigger hoop 🙂  There really is no limit to what you can embroider as far as size goes.

3. You may find that it is easier to rehoop more often instead of splitting a design down the middle.

3iseasierthan2

For example, you could look at the size of the above design and see that it could be split in half – right down the middle of the third flower, in my opinion YUCK.  It would be so much easier to put the sun in one hoop, the flowers in a second and the bear in a third – keep all the designs together. When you use alignment lines between each overlapping section, no one will ever know that you only have a 5×7 hoop!

And if you want to learn from the ground up how to create big design layouts with any size hoop – check out my Craftsy class!  Here is a discount on the class which has 7 projects – all done with a small hoop (click on graphic below to go to the sale page).  The techniques can be applied to any size hoop.  I personally enjoy taking Craftsy classes – what I like about them is that I can watch them any time and as often as I want.  Asking questions is super easy – just pause the video, ask your question and you’ll get a personal answer.

So here is a link with a discount coupon (click on the graphic below) – and if you like my Facebook page, you will see that every so often I put up discount notices for other classes!

Title Card for Blog

So these are just a few of the blog posts I have done that talk about rehooping designs to create larger layouts.  I hope that even though they are repeats, you find it nice to have all the similar information brought together in one post 🙂

Enjoy!


How to Digitize in StitchArtist Lesson 1 of many – opening the graphic, setting the plan and GO!

monkey in boxBetween Christmas and New Year’s, I thought I would try to make a couple posts on some of the digitizing functions of StitchArtist.  I know many people got the program for Christmas or are thinking about getting the program.  I’ve been using it for over a year and really enjoy creating my own designs.  I thought that creating a series of posts that follow me through a design from start to finish might help give some insight as to how a “non-professional but always learning” digitizer works with the software.

First, let me say that this project will be using StitchArtist Level 1 just to demonstrate that there is quite a bit you can do with this entry level digitizing program!  Yes, it runs on both a Mac or Windows computer and pretty much looks the same on either operating system – so just because the picture/video is done in the Mac version, pretend you are looking at a windows computer and tell yourself “Its ok that my program is not identical, if I click on the same button on my computer that looks a little different, the same thing happens so it’s all good!”  YES you can start with Level 1 and upgrade to Level 2 at any time.  YES the program is stand alone, HOWEVER, I have other Embrilliance titles installed so when you watch the video, you may see other buttons that you will not have if you only have StitchArtist authorized.  I WILL NOT be using any of these buttons, so please do not say “I have StitchArtist Level 1 and mine doesn’t look like yours, why?”  Yours will have every function and feature that I actually click on and use in this blog post – I will not be discussing the other programs.  If you are paying attention to the other stuff I’m not talking about…stop that 🙂

In case I forget, you can find out about the software from the Embrilliance website and here is the direct link to the StitchArtist page: http://www.tinyurl.com/StitchArtist.

There are many ways to do any single task – including how to digitize a design.  In fact, I would say ESPECIALLY when it comes to design creation because this is a personal and artistic form of expression.  That being said, I’m going to walk you thru ONE way that I chose to create this embroidery design – not the right way or only way – but rather, my way. Use this information any way you want!

Before I start any embroidery project, I decide what hoop I am going to use.  I’m choosing to create the design for the 5×7 or 130mm x 180mm PES hoop.  Deciding this now will tell me how much detail to include – for example I have zero desire to stitch large areas with fill stitches or cut applique shapes the size of pennies – not my idea of fun.  I also work in metric because it just makes more sense.  I know the difference between a 2mm and 3mm stitch but .078 inches or .118 inches means nothing to me visually – I can’t “see” the difference between those in my head.  But I know that a 2mm running stitch is going to be wicked tiny and a 3mm stitch will do decent curves for a running stitch.  So the first thing I will do is open my software, set my measurement and hoop.

The most common way to begin creating a design is with using a graphic or picture as a guide.  StitchArtist is NOT an automatic digitizing program.  Computer software programs have zero creativity and emotion.  Creating an embroidery design is an artform and StitchArtist provides you with tools so that you can creatively interpret the graphic into a stitch file.  So the first thing I will show you is how to do is setup your workspace and open a graphic into the program.  I drew this monkey in a gift box and scanned it into my computer as a JPG file.  The important part of this step is that what you open as a background is a graphic file such as a JPG, BMP etc.  Formats are listed on the website.  The software doesn’t care that you can’t draw – it cares that you choose a graphic on the computer to open.  How the graphic got there is up to you!

Once I open my graphic as a background, I size it to fit my hoop and save the file.  Saving often it a good plan in my book.  When someone asks how often you should save, my answer is that I save as soon as I finish something I never want to do again.  I strongly dislike duplicating work.  Therefore, I save often.

I have zero intention to replicate the information that is well documented in the manual. Again – I’m not into creating more work for me 🙂  If the manual did not exist or was poorly written, I would have a different opinion on the matter.  However, I read the manual.  Its a great read – one might even venture to say that it is entertaining and fun!  I have a copy in my kindle app so that I can search and refer to it often.  The Embrilliance manual makes sense and gives you background information on digitizing practices as well as how to use the various tools in the program.  I highly suggest that if you have not done so, that you download the manual from the Embrilliance website and check it out.  Not sure where to find it? There is a link on the StitchArtist page to both the FAQ and the manual.

So once the graphic is open in the background – that is the inspiration upon which the embroidery design is going to be created. My “vision” is that this 5×7 design will be part applique with various stitched accents.  The monkey is coming out of the gift box, so the first thing that needs to be created is the box and its lid.  My favorite drawing tool is the point input – click your mouse and that’s a node.  You do not need to have the last click be on top of the first click in order to close a shape – that’s done for you automatically using the close button on the menu bar.  And for those that want to get the most our of their software and have read the StitchArtist chapter as suggested, you already know that you can use the Command+right click (CTRL+right click in windows) to end and close the shape in one step.

The Applique stitch properties for Level 1 has two sections – the stitch properties and the tie off properties. (note: Other levels may have more pages to their properties pane.)  Hopefully you have stitched a few well digitized designs so you know that locking stitches or ties are important at the start of a color/section as well as at the end.  These are called Ties in StitchArtist and you can turn them on or off for each object you create.  Yes, I will show you some examples later on in this project of when you would not want the ties to be turned on.  You have various options for the applique properties – the style of finishing stitch and its density and width for example.

The Applique object type can have up to 3 parts and you have complete control to turn any of these – on or off.  An applique normally has a single run that stitches showing you where the fabric needs to be placed.  This is referred to as the Applique Position stitch.  The machine would stitch this and stop because it is its own colorbreak.  You would place a piece of fabric in the hoop covering this outline.  The next colorbreak is another single run (material position) – it holds down the fabric you just placed in the hoop and stops.  If the fabric you placed in the hoop was not cut to fit this shape ahead of time (either by hand or die or fabric cutter), you would remove the hoop and trim the fabric.  Return the hoop to the machine and stitch the final colorbreak – the finishing stitch.

As you can see in the applique properties, these three “stitching objects” are all part of a single object – so if you reshape the applique shape you automatically reshape each of the components. Kind of cool and saves you a lot of time.  You can also turn off any one or more of these depending on what it is you are trying to do.  For this example, our applique will have the 3 components – we’ll start off simple!

Part1

Check out the video clip here to see how we got to this point!

If you thought I was going to work through this entire design in one blog post – SORRY!  If you have the software, I encourage you to play.  By playing with the software, you will slowly develop YOUR WAY to do something which may be different than mine – and that’s a wonderful thing to happen!

We have quite a few more lessons coming up so be sure that you subscribe to my blog.  And please remember that if you have questions on the software, you will ALWAYS get an answer by clicking on the Contact Us link on the website!  This is the best and fastest way to get information on any of the Embrilliance programs.

Until next time – see you online!


Splitting Embroidery Designs for the 5×12 (130mm x 300mm) PES hoop

Multi-position hoops are pretty awesome if you want to expand your embroidery area and do bigger designs on your machine without rehooping.  LOVE this for names and border designs like an embellished yoke of a shirt!  So you get this bigger hoop and you try to send a 5×12 design to your machine and — nothing.  No big design no nothing!  So what’s so great about this hoop if you can’t use it?

What the hoop allows you to do is hoop once and you stitch designs in each position so that when complete, you have a big design.  Yes, you can attach the hoop to the machine and simply stitch designs in the hoop to create a scene or name moving them using the machine layout functions.  But it is so much easier to use software to do this.

So if you have a larger design that you want to stitch in this hoop, it needs to be split into sections that fit your 130 x 180mm design area – approximately 5×7.  To split a design you need to use software.  There are various programs out there that will do this – I use Embrilliance Essentials because it really is as easy as 1-2-3. 

1. Choose Hoop from Preferences.

2. Open Design and it will show up in the hoop -size, add lettering, whatever you want to do.

3. Go to File > Save Stitch file and the software splits and saves the design file for you into sections that fit your machine.

See it in action – click here

Click here to see how easy it can be to split embroidery designs for this hoop!

Click here to see how easy it can be to split embroidery designs for this hoop!

No fiddling with assigning stitches to hoop flags or moving stuff because the software needs to have complete colors in specific spots or any other “technical” thing for you to worry about.   The Essentials software takes care of all the “technical stuff”.  You just need to be created and create the design layout you want.  Save the file, load each to the machine in the order & position instructed in the TXT file and start stitching.  The TXT file even includes the color break information from the original Large design layout. 

Like I said – super duper simple! 

Until next time – Happy Stitching!   Lisa

If this idea on easily splitting designs intrigues you – you can get more information on Essentials by clicking on this graphic and link:

Click Here for information on all of the affordable easy to use Embrilliance products!

Click Here for information on all of the affordable easy to use Embrilliance products!


Saving cut files for the Cameo, Scan ‘N Cut, & more for embroidery designs

Create with fabric cut using Silhouette Cameo - Essentials will save the cut files from your appliqué embroidery designs!

Create with fabric cut using Silhouette Cameo – Essentials will save the cut files from your appliqué embroidery designs!

I had mentioned in an early post that there was a simpler solution on the horizon for creating cut files for machine embroidery appliqué designs.  Well it has arrived!  The current version of Essentials software has some pretty nifty features and functions for existing appliqué embroidery designs and I just finished the video showing a quick overview of these functions.

Before I give you that link let me first talk about the purse shown to the left.  I’ve been reading about all these people who were embroidering monograms on straw floppy hats they had gotten at discount stores like DollarTree.  Ours did not have any but they did have these really cool circular placemats in all sorts of bright colors.  I picked up a few thinking I could bring out the Puffy Foam from its stash in my closet and try my hand with a swirly monogram.  Before I forget – this alphabet collection is from Rivermill Embroidery and stitches out LOVELY!

And then I thought about trimming those appliqué pieces in the hoop on a textured rather stiff surface like this straw placemat.  Yeah.  I’ve been doing this long enough to know there was not enough wine in my house to calm my nerves with that project! Even with my favorite Kai Scissors! But I knew Embrilliance was working on creating the cut files so I waited a week or so until I got the test version and HOLY SMOKES!  Embrilliance, Cameo and machine embroidery appliqué designs is a winning combination.  I’m in heaven.

And sure I can rather quickly create the cut file in the Studio software and double checking to make sure that it is the exact size and shape to match the embroidery design – but that’s only part of what makes this triple combination so perfect.  In Essentials, when you combine two designs together and over lap them, the Remove Hidden Stitches (RHS) function kicks in when you save the stitch file.  The software AUTOMATICALLY looks at the overlapped area and removes the stitches from the first design on the bottom during the save process.  And what is even better, is that this process is only done in the stitch file – what you will send to the machine.  Your original working file still has the complete designs.  Yes, if you want to tweak things and change them up, no need to start over – simply open your working file (has the BE extension), make your changes, and resave to the stitch file.

One of the potential lumps in an overlapped appliqué

So that’s all fine and dandy with traditional embroidery designs….but yes… this is also possible with appliqué designs – OR if you mix and match appliqué and traditional embroidery style designs!  In other software programs, and I’ve been doing it for years so its nothing new, you would have to open the combined designs and use the stitch editing function to select and delete those stitches underneath.  Again, not hard to do, just extra steps.  And you have to be careful with appliqué, is that you don’t want to remove the placement and material stitches when you start deleting things – then you get into trouble at the machine.

But what Brian Bailie of Embrilliance has done is developed a way for us to go in and tell the software “hey this is an appliqué design.  It has running stitches that are used to mark where the appliqué fabric goes, hold the appliqué fabric in place so you can trim around it, and then finish it off with a satin or other decorative stitch.  So now that you know that, Mr Essentials Software Program, when I choose to overlap these designs, you need to think of the region enclosed by the appliqué position running stitch as “filled with stitches” not this empty white space.  I want you to remove anything that is underneath just like you would if it was a filled stitch design”  Hey – I talk to my software and computers all the time so this does not seem like an unusual conversation to me 🙂

comparison of puffy foam vs none

Now removing the extra satin stitch from overlapped designs may not be that impressive to you.  So you have a little bit of overlapped satin stitches – eh no big deal!  Well you haven’t stitched with Puffy Foam yet have you!  This hit me when I was trying out colors on placemat number 1…the letter S does not have foam under the letters and looks rather choppy.  I was going for a tropical look so not only did the teal colored finishing stitch give me the pop I was looking for, but placing the puffy foam on top of the appliqué fabric and having the finishing satin go right over it really helped it stand out and make a statement.

And because I was using Essentials software, when I stitched the letter S first, where the designs overlapped, the satin had been removed — so there was no shiny bump in those areas – the satins were gone.

I use the Puffy Foam made by Sulky – it tears away very cleanly without pulling the stitches.  No I have not tried craft foam – I have enough of the original in my stash to host kindergarten arts and crafts day for a month so there is no need for me to try anything else.  Hey, it was on sale and its not like it will go bad!

Seriously, my stash has been in development for years.  I have been challenging myself to use fabric in my stash first so it has been shrinking – not as quickly as I would have liked, but its a work in progress.

Saving a Cut File in Essentials from an appliqué position shape

Saving a Cut File in Essentials from an appliqué position shape

So I saved my cut files just like the video shows – on the Applique Position tab, you choose Save as CutFile and in the Save as dialog choose which format you want to save to.  Now just so you know, a cut file is not a stitch file…and its not really a graphics file.  But I am so happy that the folks at Embrilliance figured out take the stitch file information and translate that in such a way that the cutting machine can create a shape that fits inside the stitched shape!  This is an exclusive feature that is being patented.  On top of that, there was a lot of conversations and working behind the scenes with the folks at Silhouette in order to actually create the Studio file.

And the software will also save an FCM file which is what is used by the Brother Scan ‘N Cut (SNC)  – save this file to a USB stick, put it in your SNC and pull it up to cut right there on the screen!  The other two formats are more universal – SVG and PLT.  If you have a cutting machine that uses or imports either one of these formats this is what you will want to save to!  The SVG format is super popular among those in the scrap booking industry.  No.  Just say No….I have to tell myself No every so often that I do not need to know more about scrap booking….I fear it can be just as addictive as machine embroidery and my stash does not need to go in that direction 🙂

So a lot of work went into making this easy to use function – so glad that we get to benefit from their hard work!  So are you interested in seeing the software in action with this neat feature?  Here is the link to the youtube video:

Check it out.  If you already own Essentials the update will be available (if it hasn’t been posted yet) from their website under the download link.

Yes this software works on either Mac or Windows and if you happen to own both computers, you can install the program on both without extra cost.

If you don’t own Essentials and it looks like something you might be interested in, why not check it out?  I don’t work for the company – I’ve been an independent educator for machine embroidery for well over 17 years.  However, I am an Embrilliance affiliate because I believe that this company offers an excellent product for the price and I am impressed with the innovative thinking that goes behind all the features and functions that are added to the programs.  12 built in fonts that stitch out well at various sizes, monograms or multiline text capabilities, resize designs with stitch recalculation by either pulling on the corners of the design to make the design “that big” or type in an accurate size, merge designs, remove hidden stitches, work with BX fonts so you can type names using fancy alphabets, sorts colors, converts to your favorite thread brand, print templates and color change sheets, split for the basic multi position hoops, switch between metric and inches with a simple button at the top of the screen, add a basting box and more — all this in one program with an easy to use interface.

ANYWAY – I’ll get off my soapbox for now 🙂  Have a great week – happy stitching!  Lisa SewBubbles

Click Here for information on all of the affordable easy to use Embrilliance products!

Thank you for showing your support by clicking on my affiliate link to get more information!


How I create a cutting file of my Appliqué embroidery design for my Silhouette Cameo or Brother ScanNCut

I love that there is a way to cut fabric shapes for appliqué that is as simple as printing a document or pressing the copy button on a photocopying machine. Technology may be a bit frustrating at times to grasp, but once you do, man do the ideas of “what can I try next?” come flooding on in.  So when I got my Cameo, I knew I had to find a way to create the shapes for my appliqué embroidery designs – the exact size so there would be no trimming at the machine.

Original designNow, I will tell you a secret….all these steps are going to be completely obsolete in a few weeks.  But in the meantime, this is how I get a cutting file that matches my embroidery appliqué design.

Embrilliance Print PreferencesHere is the sample design open in my software – on the right I see the two design objects for the lettering and the frame.  At the bottom right I see the color breaks in the design.  I use Embrilliance Essentials and this program has a nice function of being able to print a selected color.  For those with a Brother ScanNCut, all you need to do is make this choice in your printing preferences, select the color of the run stitch, print, scan and cut.  BOOM how easy was that?!

 

I do suggest that you change the thread color before you print to something with high contrast.  Black or Dark Blue or Brown for example will work quite nicely.  You can always change it back if you need to 🙂

Since I also print actual size templates of my regular embroidery designs, I have gotten used to using the Print Preview when I am on my Windows computer – in case I forgot to uncheck this preference…. yup if you have nothing selected, nothing will print.  Using print preview reminds me right away to either change the setting or simply go to Edit > Select All then print again.  Always more than one solution to the problem at hand.

So that’s great for the ScanNCut, but how do I get something that my Cameo can use?  Like I mentioned – there are many different ways to accomplish a task – this just happens to be my way.  AND you’re going to keep an eye out on my blog, because in a few weeks I’m going to show you something that will make you flip!  And for those on the fence for getting a cutting machine – it could be what says “Go For It!” but let’s get started with the steps.

First, I again go to the Preferences and this time choose Grid and set it for 1 inch (25.4mm).  Be sure to apply and that the grid option is checked under the View menu.  The one inch grid is going to help us make sure we create the correct size cutting file.

Step1Next, I expand the appliqué design so I see all of the object breaks and select the running stitch for the shape.  It can be either the placement or the material – sometimes the material color will have a more detailed cut line so you will want to use that one.  If the appliqué has a “hole” in it, like the letter A – the placement may just be the outside line of stitching but the material run will also have the hole stitched so you can trim it.  So check to see which one is the best to use.

When I have this object selected, I check to make sure that I can see the line on screen.  If I can see the line, I’m ready to take a screen capture of what I’m looking at.  I use a program called SnagIt but there are many other programs out there.  You can even use the SHIFT+PRT SCR command in Windows which is on every windows computer.  If you do not have a screen capture program or don’t know how to take one, I recommend that you go to your favorite search engine and type in “how to I take a screen capture in Windows XYZ” where XYZ is the name of your operating system.  This will be the best way for you to find the best way for your to do this.

Cameo2The next step is to open this graphic of the embroidery design into the Studio software.  I have not upgraded to the newest version yet – not enough hours in the day!  But what you want to do is change the size of the picture of the design by dragging the handles – and matching the 1 inch grid of the graphic with the 1 inch grid of the studio software.  This is the key – the graphic must be the exact size in order to create the correct size cut file.

I can not simply type in the size because I don’t know what the size is.  The “size” that you type into the Studio software is of the entire graphic, not the stitch line that I want to create.  Using the grid was the simplest way that I have figured out to make sure that the picture of the embroidery design is the exact match so that the resulting cut file will work.  Getting the right size is the most important part of the information I want to give you.  I am in no way an expert in the Studio software!  I just know enough to get the job done that I want to do without too much work.

Cameo3Since I am not using the current version of Cameo Studio, what you see may be a bit different.  I use the freehand drawing tool to quickly click and make an outline that sort of looks like the shape I want.  Creating the perfect shape on the first pass is never my intention.  I use the node/point editing tool to reshape to create an exact match to the line of stitching.  I always find it easier to edit something than to try and draw it perfect the first time.

If you are not familiar with how to use the Cameo Studio software, I would recommend you check out the tutorials on the Studio website.

http://www.silhouetteamerica.com/faq/solution/silhouette-studio-tutorials

If you are more of a visual person, I would check out their youtube channel: https://www.youtube.com/user/SilhouetteAmericaInc

Now one might ask why I don’t use the tracing function.  When you bring in a low resolution image like a screen capture,  you get a message about not getting a smooth cut file.  Even if I brought in just the running stitch line – two problems exist.  One, you have a grid that the software will try to “trace” as well.  It doesn’t know you don’t want to cut the grid.  So if you trace the design, you’ll have to go back in and delete.  So using the grid technique to size the graphic to create the correct size doesn’t work well with the tracing function.

But like I said – there is always more than one way to get to the final result – you may find a better way!  I just hope that the information presented helps those that haven’t tried using their Cameo to cut appliqué shapes!  Have fun!

And don’t forget to follow my blog to get the exciting news I’ve been hinting about 🙂  Seriously – its gonna be wicked cool and you don’t want to miss out on news!

Until next time – may your bobbins be full!

Click Here for information on all of the affordable easy to use Embrilliance products!

Click Here for information on all of the affordable easy to use Embrilliance products!